Shure MXWANI8 Specifications:
| RF Carrier Frequency Range | USA, Canada, Mexico: 1920–1930 MHz
Europe, Asia, Middle East: 1880–1900 MHz |
| Working Range | 50 m (160 ft)
Actual range depends on RF power setting and signal absorption, reflection and
interference. |
| Audio Frequency Response | 50 Hz – 20 kHz (+1, -3 dB)
Dependent on microphone type |
| Dynamic Range | >99 dB, A-weighted |
System Gain (Mic gain @ 0dB to line level output
on MXWANI through Dante) | +50 dB |
| Latency | 18 ms, nominal |
| System Audio Polarity | Positive pressure on microphone diaphragm (or positive voltage on pin 3 of TA4M
connector) produces a positive voltage on pin 2 of the ANI (with respect to pin 3
of the low-impedance output). |
| Radio Transmission | Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK),
365 kHz max. deviation |
| RF Sensitivity | -87 dBm, minimum |
| Power | 19 dBm (80 mW) maximum, See Frequency Range and Output Power table |
| Cable Requirements | Cat 5e or higher, shielded, 100 m maximum between network devices |
| Network Addressing Capability | DHCP, link-local, static |
| Operating Temperature Range | 0°C (32°F) to 49°C (120°F) |
| Storage Temperature Range | -29°C (-20°F) to 74°C (165°F) |
| Frequency Range and Microphone Transmitter Output Power |
|---|
| Z10 BAND |
| FREQUENCY RANGE (MHz) | 1920 to 1930 |
| REGION | USA, Canada, Mexico Low = 0.63 |
| POWER (mW) | Medium = 3.16
High = 15.85
Maximum = 79.43 |
| Z11 BAND |
| FREQUENCY RANGE (MHz) | 1880 to 1900 |
| REGION | Europe, Asia, Middle East Low = 0.63 |
| POWER (mW) | Medium = 3.16
High = 15.85
Maximum = 79.43 |
How Can We Help?
