Mackie ThumpSub GO Battery-Powered Portable Subwoofer
Expected June 30, 2026
- Swappable, Rechargeable Battery.
- Two hot-swappable battery compartments for up to 12 hours of continuous bass thumping.
- One GB-200 battery included for up to 6 hours (Optional second battery sold separately.)
- Slim Design.
Get fast answers on setup, compatibility, and system matching.
✔ No pressure. Just real help.
Your request was saved successfully.
Mackie ThumpSub GO is a battery-powered portable subwoofer with a slim, ergonomic design that lets you pull off those iconic bass drops anywhere you GO-without needing a power outlet. Get up to 12 hours of battery life with two battery compartments, letting you hot swap batteries without losing power. Connect portable PA speakers, like the Mackie Thump GO battery-powered loudspeaker, for a complete stereo or zone PA system with deep bass. Stream wirelessly through the whole system via Bluetooth. Carry the bass like a briefcase.
Mackie ThumpSub GO Battery-Powered Subwoofer Features:
- Swappable, Rechargeable Battery.
- Two hot-swappable battery compartments for up to 12 hours of continuous bass thumping.
- One GB-200 battery included for up to 6 hours (Optional second battery sold separately.)
- Slim Design.
- The portable subwoofer design means you can place ThumpSub GO horizontally or vertically, and you can carry the bass like a briefcase with the built-in ergonomic handle.
- Connect two loudspeakers to ThumpSub GO for a complete stereo or zone PA system with floor-shaking bass.
- Stream music wirelessly through the whole system with Bluetooth.
- ThumpSub GO is optimized for the Thump GO battery-powered loudspeaker, but it works perfectly with Mackie ShowBox, or any portable powered PA speaker.
- Powerful Low-End Response.
- Two custom 8" low frequency drivers.
- 400W Class-D amplifier.
- Up To 12 Hours Battery Life (6 Per Battery.)
- Two hot-swappable battery compartments.
- Up to 12 hours of battery life when using two batteries.
- One GB-200 battery included for 6 hours battery life.
- Optional second battery sold separately.
- Slim, Ergonomic Design.
- Easy to carry with built-in top handle.
- Horizontal or vertical orientation.
- Connectivity And Bluetooth Streaming.
- Two combo XLR/TRS inputs.
- Two XLR outputs for connected speakers.
- Stereo and mono output modes.
- Bluetooth streaming. Optimized for Thump GO, but works with any portable powered loudspeakers with up to 10" woofer size. Threaded pole cup for SPM400 speaker pole (sold separately.)
- Essential Subwoofer Features.
- High pass and full range output modes. Phase inversion switch.
- Indicator Lights.
- Overload LED and protection
- Front LED on / off switch
- Two battery life status LEDs.
Mackie ThumpSub GO Product Specifications:
Acoustic Performance
Frequency Response (-10 dB): 32 Hz - 152 Hz
Frequency Response (-3 dB): 39 Hz - 100 Hz
Maximum SPL Peak: 123 dB
Transducers
Low Frequency: 2x 8in / 203 mm custom woofer
Power Amplifiers
System Power Amplification
Rated Power: 400 watts peak
Low Frequrency Power Amplifier
Rated Power: 400 watts peak
Rated THD: <1%
Cooling: Convection
Design:Class D
Input/Output
Input Type: 2x Female XLR - 1/4" balanced TRS combo jack and Bluetooth 5.4
Mic/Line Impedance: 600 Ω Balanced
Output: 2x Male XLR Balanced
High Pass Mode: Full Range, High Pass
Output Mode: Stereo/Mono
Phase: Normal/Invert
Output Impedance: 1 MΩ
Bluetooth Information
Bluetooth Protocol: 5.4
Bluetooth Function: Audio Streaming
Line Input Power/GB-200 Rechargeable Battery Information
Detachable line cord: 100-240V~, 50-60 Hz, 75W
AC Connector: 3-pin IEC 250 VAC, 10 A male
Power Supply Type: Switchmode
Battery Type: Lithium Ion
Battery Life: Up to 12 hours(6 hours per battery)
Charge Time: ~3 hours
Capacity: 8880 mAh
Nominal Voltage: 11.1 V
Battery Compartments: Two (hot swappable)
Operating Temperature Range: -10 - +45 °C// 14-113 °F
Charging Temperature Range: 0 - +45 °C // 32-113 °F
Safety Features
Input Protection: Peak and RMS limiting, power supply and amplifier thermal protection
Display LEDs: Front LED, Bluetooth Status, Battery Status, Overload
Mounting Methods
The ThumpSub GO subwoofer is designed to sit on the floor or stage. They are NOT designed to be pole-mounted or suspended. The cabinet has no rigging points and is not suitable for rigging. Never attempt to suspend a ThumpSub GO subwoofer by its handles.
Physical Properties (Product)
Height: 22.0 in // 559mm
Width: 9.8 in // 249 mm
Depth: 21.0 in // 533 mm
Weight: 40.0 lb // 18.1 kb (No Battery); 41.7 lb // 18.9 kg (One Battery)
Physical Properties (Packaged Product)
Height: 26.8 in // 681 mm
Width: 13.0 in // 330 mm
Depth: 24.5 in // 622 mm
Weight: 44.4 lb // 20.1 kg
Each ThumpSub GO Retail Box Includes:
(1) Mackie ThumpSub GO Battery-Powered Portable Subwoofer
How Can We Help?