Yamaha DHR12M 12" 2-way Powered Loudspeaker with Utility Storage/Transport Bag Package

Yamaha DHR12M Product Specifications:

Cabinet designs optimized for a range of audio environments
The DHR Series features a comprehensive lineup optimized to meet the demands of specific applications. The 10" model is equipped with a rotatable HF horn and a dedicated UB-DXRDHR10 U-bracket for use in fixed installations and utility, while the 12" model is the first Yamaha speaker to feature a coaxial compression driver for improved clarity and smoother frequency response for floor monitoring. The series is rounded out by a 15" model featuring dual-angle pole sockets and rigging points for use in fixed installations or as temporary main speakers for sound reinforcement.

Ultra-Precise DSP Processing for High-Definition Sound
All full range models feature Yamaha's proprietary FIR-X tuning utilizing linear phase FIR* filters for the crossover network. FIR-X tuning simultaneously optimizes frequency and phase response while adjusting the time alignment between the HF and LF transducers. This creates a very smooth response around the crossover point, providing much better clarity and imaging than what is possible with typical crossovers. All signals are precisely processed by a high-performance processor for high definition sound quality. All full-range models employ high-precision 24bit discrete A/D and D/A converters with superior S/N ratio and dynamic range.

Intelligent Dynamic Control for Consistent Clarity at Any Output Level
D-CONTOUR is an intelligent multi-band compressor that gives you powerful and consistent sound throughout all output levels. By constantly monitoring the output of multiple frequency bands and calculating the optimum EQ adjustments for each, even the maximum sound output maintains outstanding clarity and musicality. With the DHR Series, D-CONTOUR provides a more detailed tuning of your sound with two different settings: FOH/ MAIN mode or MONITOR mode. FOH/MAIN mode boosts low-frequency to compensate for low-end that is typically missing when speakers are used in suspended applications or mounted on a speaker stand. MONITOR mode is completely optimized for monitor application by intelligently taming down the low-frequency, smoothing out a wide range of frequency bands to give you stunning clarity for monitoring your sound. Both of these presets were perfected by performing countless listening tests with skilled sound engineers, giving you a multi-band compressor that performs dynamically, delivering consistent sound with low distortion at any output level.

Extensive DSP Protection Functions for Maximum Output
In a typical system comprising passive loudspeakers, power amps and signal processors, trying to set optimal parameters for each component can be a daunting task. One of the advantages of active loudspeakers is that the combination of transducers and amps can be perfectly optimized. During the development of the DZR, DXR mkII, DHR, DBR and DXS series, we measured and tested the durability of each transducer and the overall amp output through countless indoor and outdoor listening tests. Based on the test results, we were able to set the optimal limiter point for each model using precise DSP control. In addition to the optimal limiting, our speakers employ many of the same protection functions used in our top-class PC-D Series professional power amplifiers. A microprocessor and high-power DSP monitor the status of the power supply, power amplifiers, transducers and ongoing signals to protect all aspects of each component. As a result, these speakers can perform to their full potential while ensuring reliable operation in even the most severe conditions.

Easy-to-use Onboard 2-Channel Mixer
DHR Series speakers have two input channels. CH1 has a combo jack which accepts both XLR and TRS Phone allowing for either Mic or Line level input signals. CH2 offers two input options; a combo jack that accepts XLR or TRS Phone, and a pair of RCA pin Jacks for input from CD players or other stereo line-level sources. The onboard mixer allows you to select either CH1+2 MIX to mix the signal of CH1 and CH2, or CH1 THRU to pass the signal from CH1 only.

General specifications
Speaker type		2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB)		55 Hz - 20 kHz
Coverage area		H90° x V60°
Crossover		1.8 kHz: FIR-X tuning (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m)		129 dB SPL
Components	LF	Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite
	HF	Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite
Amplifier class		Class-D
Power rating	Dynamic	1,000 W (LF: 800 W, HF: 200 W) *1
	Continuous	465 W (LF: 400 W, HF: 65 W)
Cooling		Fan cooling, 4 speeds
Power consumption		74 W (1/8power), 18 W (Idle)
Power requirements		100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters		24 bit 48 kHz Sampling
Processors		HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors		INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material		Plywood
Finish		Durable Polyurea Painting, Black
Handle		Side x1
Pole socket		Φ35 mm x1 (Bottom)
Rigging		-
Floor Monitor Angle		57°
Dimensions	W	500 mm (19.7")
	H	343 mm (13.5") (with rubber feet)
	D	454 mm (17.9")
Net weight		16.5 kg (36.4 lbs)
Options		-

^{*1: Total peak power of individual outputs (AC 120V, 25 °C). This value was measured at minimum load impedance, with protection released.}

This Package Includes:

(1) Yamaha DHR12M 12" 2-way Powered Loudspeaker with FIR-X Tuning
(1) AC Power Cable
(1) Clutch CL-CADDY200 Utility Storage/Transport Bag
(2) Clutch 20' Green Sure-Fit XLR Female to XLR Male Microphone / Speaker Cables
(2) Clutch 20' Sure-Fit XLR Female to XLR Male Microphone / Speaker Cables
(5) 8" Reusable Hook and Loop Cable Ties