Be the first to review this product
Expected December 31, 2024
Shure ULXS24/58 Handheld Wireless System Features:
- Roll with no shake or rattle: Handling noise gets absorbed by the pneumatic shock mount, keeping the sound free of vibration.
- Screen out unwanted air: When wind and plosives try to take over, the spherical mesh grille and built-in pop filter keep them out of the mix.
- Rugged for the road ahead: The mic's durable construction and the break-resistant mic clip keep the SM58 going strong through the toughest performances.
- Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech.
- Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting.
- Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors.
- Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission.
- Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration.
- Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals.
- Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position.
- Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound.
- Rugged construction and excellent cartridge protection for outstanding reliability.
Shure ULXS24/58 Specifications:
SM7B Cardioid Dynamic Microphone
Type: Dynamic
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Cardioid
Electromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted):
60 Hz: 11 dB
500 Hz: 24 dB
1 kHz: 33 dB
Impedance: 150 Ω for connection to microphone inputs rated at 19 to 300 Ω
Output Level (at 1,000 Hz): Open circuit voltage: – 59.0 dB (1.12 mV) / 0 dB = 1 volt per Pascal
Switches: Bass rolloff and mid-range emphasis: Slotted response selector switches
Cartridge Shock Mount: Internal air-suspension shock and vibration isolator
Microphone Connector: Three-pin professional audio (XLR)
Swivel Assembly: Integrated, captive nut for ease of attachment to stand, fits 5/8 in.–27 thread
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Case: Dark gray enamel aluminum and steel case with dark gray foam windscreen
Weight: 765.4
(1) ULX2/58 Handheld Transmitter
(1) SM58 Microphone
(1) ULXS4 standard diversity receiver
(1) Microphone clip
(1) Grip/switch cover
(1) Screwdriver
(1) Zipper bag
(2) 1/4 wave antennas
(1) Power supply
(1) 9V battery
(1) User guide
Login
Register
Forgot Your Password