Be the first to review this product
Expected November 30, 2024
The PSM300 Personal Monitor System delivers wireless stereo monitoring for improved clarity and reduced feedback over traditional stage wedges. Performers can create their own custom mixes by adjusting the stereo blend and overall volume level at the bodypack, resulting in lower volume on stage and enhanced audio detail. Easy to set up and operate, PSM300 features one-touch frequency syncing and solid wireless RF stability between transmitters and receivers. With rugged, dependable hardware and hard-working technology, Shure PSM300 Personal Monitor Systems deliver a greatly improved monitoring experience on stage.
Shure PSM300 Twinpack Monitoring System Features:
- Send two channels of audio wirelessly to performers onstage.
- Solid RF connection over a 300 foot (90 meter) range.
- Create a personal mix on each bodypack with adjustable stereo balance or MixMode two-channel mono blend.
- Up to 90 dB signal-to-noise ratio provides clear, detailed audio at any volume.
- Systems available with Shure Sound Isolating earphones.
- One-touch scan and IR sync quickly and easily assigns a clean wireless channel.
- No complicated menus, just simple volume and mix controls that focus on the performance.
- All-metal half-rack transmitter.
- Slim, lightweight bodypack attaches easily to a belt or guitar strap.
Shure PSM300 Specifications:
RF Carrier Range: 488-937.5 MHz (varies by region)
Compatible Frequencies Per band: up to 15
Tuning Bandwidth: 24 MHz Maximum (varies by region)
Operating Range (environment dependent): 90 m (300 ft)
Audio Frequency Response: 38 Hz –15 kHz
Signal-To-Noise Ratio (A-Weighted): 90 dB (typical)
Total Harmonic Distortion (ref. ±34 kHz deviation @1 kHz): <0.5% (typical)
Companding: Patented Shure Audio Reference Companding
Spurious Rejection (ref. 12dB SINAD): >80 dB (typical)
Latency: <0.7 ms
Frequency Stability: ±2.5 ppm
MPX Pilot Tone: 19 kHz (±1 Hz)
Modulation: FM, MPX Stereo (ref. ±34 kHz deviation @1 kHz)
Operating Temperature: -18°C to +63°C
RF Output Power: 10, 20, 30 mW (varies by region)
RF Output Impedance: 50 Ω (typical)
Net Weight: 783 g (27.6 oz.)
Dimensions: 43 x 198 x 172 mm (1.7 x 7.8 x 6.8 in.), H x W x D
Power Requirement: 12-15V DC, 260 mA Maximum
Audio Input
Connector Type: 6.35 mm (1/4") TRS
Polarity: Tip positive with respect to ring
Configuration: Electronically balanced
Impedance: 40 kΩ (actual)
Nominal Input Level: switchable: +4 dBu, –10 dBV
Maximum Input Level:
+4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection: Up to 60 V DC
Audio Output
Connector Type: 6.35 mm (1/4") TRS
Configuration: Electronically balanced
Impedance: Connected directly to inputs
Active RF Sensitivity at 20 dB SINAD: 2.2 µV
Image Rejection: >90 dB
Adjacent Channel Rejection: >60 dB
Intermodulation Attenuation: >50 dB
Blocking: >60 dB
Audio Output Power (1kHz @ <1% distortion, peak power, @32Ω): 40 mW + 40 mW
Minimum Load Impedance: 4 Ω
Headphone Output: 3.5 mm (1/8") stereo
Output Impedance: <2.5 Ω
Net Weight: 98 g(3.5 oz.) (without batteries)
Dimensions: 110 x 64 x 21 mm H x W x D
Battery Life: 5–7 hours (continuous use) AA batteries
(1) P3T Transmitter
(1) Carrying Bag
(1) PS24 Power Supply
(1) Set of Rackmount Hardware Kit
(2) P3R Body Pack Receivers
(2) Sets of SE112 Earphones
(4) AA Batteries
(2) BNC Bulkhead Adapters
(2) 1/4 Wave Antennae
Login
Register
Forgot Your Password