Be the first to review this product
Sennheiser EW-DX-EM-2-DANTER1-9 Digital 2-Channel Half Rack Receiver with DANTE | R1-9 Frequency Range
Questions? Call 1-800-355-7746 or Chat below
2 channel half rack (19") receiver for use with Evolution Wireless Digital handheld and bodypack transmitters. The stationary two-channel receiver with switching diversity technology shall be for use with up to two companion transmitters as part of a digital wireless RF transmission system. The receiver shall feature Bluetooth Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and Android. The receiver shall feature an automatic frequency setup function with spectrum scan functionality in order to establish an equidistant frequency grid with 146 channels in standard mode and 293 channels in Link Density Mode. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be ≤ -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB. System latency shall be 1.9 ms.
Focus less on the wireless and more on the audio. Sennheiser EW-DX simplifies your professional workflow by utilizing refined technologies and decades of research to deliver a digital UHF system that can be scaled with ease. Multiple hardware and software options create networkable solutions for nearly any stage or campus, while equidistant channel spacing, auto scan, and Bluetooth Low Energy sync automatically coordinate and set frequencies with the push of a button. Monitor your devices from a distance-even from your pocket-with tools like Sennheiser's Control Cockpit, Wireless Systems Manager, and Smart Assist app. The future of wireless is here. EW-DX takes the complexities out of wireless audio by employing sophisticated tools that streamline the setup and monitoring process. With the press of a button, Auto Scan automatically assigns channels using an equidistant tuning grid that allow you to pack more channels more reliably, without problematic intermodulation interference. Take control of the system from your mobile device via the Sennheiser Smart Assist app or utilize advanced software options like Wireless Systems Manager (WSM) and Sennheiser Control Cockpit for a detailed system view in complex, networked environments.
Sennheiser EW-DX-EM-2-DANTE Digital 2-Channel Receiver Features:
- EM 2 : 2 channel half rack (9,5") with Dante.
- 88 MHz switching bandwidth.
- Equidistant Channel Spacing: 146 channels in Standard Mode; 293 channels in Link Density Mode.
- Antenna power and loop through up to 16 channels (4 x EM 4.)
- Secure AES 256 encryption.
- Network enabled for control with Sennheiser Control Cockpit / media control system through a number of 3rd party modules.
- Flexible network mode from single cable to a full redundancy.
- Clear and easy focused user interface with OLED display.
- Ethernet connectivity (IPv4 and IPv6.)
- All-metal housing.
Sennheiser EW-DX-EM-2-DANTE Product Specifications:
Audio link frequency ranges:
Q1-9 470.2 - 550 MHz
R1-9 520 - 607.8 MHz
S1-10 606.2 - 693.8 MHz
S2-10 614.2 - 693.8 MHz
S4-10 630 - 693.8 MHz
U1/5 823.2 - 831.8 MHz & 863.2 - 864.8 MHz
V3-4 925.2 - 937.3 MHz
V5-7 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz
X1-6 1350.2 - 1398.8 MHz
X9-18 1435.2 - 1524.8 MHz
Y1-3 1785.2 - 1799.8 MHz
Bluetooth Low Energy (BLE) frequency range: 2402 - 2480 MHz
Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs
Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level
Dynamic range: 134 dB
System latency: 1.9 ms
Operating temperature: -10 °C - +55 °C (14 °F - 131 °F)
Relative humidity: 5 - 95 % (non-condensing)
Channel spacing (equidistant grid): 600 kHz / 300 kHz
Remote control: Smart Assist App / Sennheiser Control Cockpit
Ease of use: Dante, OLED Display
Security / encryption: AES 256
Switching bandwidth (up to): 88 MHz
EW-DX EM 2 (Rack Receiver)
Input voltage: 11 - 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher)
Input current: ≤ 1 A
Transmit power (radiated): BLE: max. 10 mW EIRP
Audio output power: 18 dBu max.
Headphone output: 2x 70 mW @ 32 Ω
Ethernet: RJ-45 socket, IEEE802.3 / 100Base-TX (half+full duplex) / 10Base-T (half+full duplex) / (CAT5e or higher)
Dimensions: 212 x 44 x 189 mm (8.35" x 1.73" x 7.44")
Weight: approx. 1000 g (2.2 lbs) (without antennas and power supply)
Each EW-DX-EM-2-DANTE Retail Box Includes:
(1) Sennheiser EW-DX EM 2 channel half rack (19") receiver with DANTE
(2) Rod antennas
(1) Power supply with country adapters
(1) GA 3 rackmount set
(4) Rubber feet
(1) Quick guide
(1) Safety guide
(1) Manufacturer declaration sheet