JBL Professional C50PACK-WH Packaged Surface-Mount Subwoofer-Satellite Loudspeaker System (white)

SKU #: C50PACK-WH
$659.00
As low as $66/mo or 0% APR with Affirm Logo
Item Backordered

Expected June 30, 2025

Fast Shipping

Fast Shipping

Most products ship same-day

30-Day Price Protection

30-Day Price Protection

Find a lower price, you're covered.

8000+ Reviews

8000+ Reviews

95%+5-star reviews>

30-Day Returns

30-Day Returns

Don't Like it? Return most items.

The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface-mount system.

Control 50 Series Features:
  • Versatile four satellite speaker system.
  • Stylish, unobtrusive design fits into a wide variety of decor.
  • High fidelity sound.
  • Selectable 70V/100V for distributed lines, or low impedance.
  • Wall-mount brackets include.
  • Available in black or white.

Control 52 Satellite Speaker
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low-distortion 60 mm (2 ½ in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.

Control 50 Subwoofer
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T's included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.

System Configuration
Available as packaged system or as separate items, the Control 50 Series is extremely versatile system. The C50PACK system contains four Control 52 satellite speakers and one Control 50S/T subwoofer as an easy predesigned system. For smaller floor spaces, the Control 50S/T subwoofer can be utilized with two Control 52 satellite speakers. The Control 50 system is mono. Both the Control 50S/T and Control 52 can be intermixed in systems along with the Control 40 Series in-ceiling models - Control 40CS/T subwoofer and Control 42 satellite speaker - to match the form factor requirements of a wide variety of applications.

JBL Professional C50PACK-WH Specifications:

Frequency Range (-10 dB)32 Hz – 20 kHz
Frequency Response (±3 dB)50 Hz – 17 kHz
Power Capacity200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
(2.83V, 1m)
87 dB (subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note)
Nominal Impedance4 ohms (in bypass/thru mode) with 4 satellites
Transformer Taps80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance

 

Control 50S/T Subwoofer Specifications:

Frequency Range (-10 dB)32 Hz – 200 Hz
Frequency Response (±3 dB)50 Hz – 150 Hz
Power Capacity300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
(2.83V, 1m)
95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m)115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance8 ohms (in bypass/thru mode)
Transformer Taps80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input ConnectorsSix removable locking 2-pin connectors with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
MaterialTop, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D)Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight9.0 kg (20 lbs)
Shipping Weight10.2 kg (23 lbs)
Included AccessoriesWall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

 

JBL Professioanl Control 52 Specifications:

Frequency Range (-10 dB)140 Hz – 20 kHz
Frequency Response (±3 dB)180 Hz – 17 kHz
Power Capacity50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity85 dB (4.0V/1m = 1W)
82 dB (2.83V, 1m)
Nominal Coverage Angle150° x 150° (omnidirectional)
Rated Maximum SPL (1m)94 dB average, 100 dB peak
Nominal Impedance16 ohms
Transducer Driver60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
Input ConnectorRemovable locking 2-pin connector with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
MaterialHigh impact polystyrene, painted zinc-plated metal grille.
Dimensions (H x W x D)Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
Wall bracket: 51 mm (2.0 in)
Net Weight0.7 kg (1.5 lbs)
Shipping Weight0.8 kg (1.8 lbs)
Included AccessoriesWall bracket (both speaker and wall parts), 2-pin locking connector.

The C50PACK-WH Retail Box Includes:
(4) Control 52 Satellite Speakers (white)
(1) Control 50S/T Subwoofer (white)
(2) Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker
(1) Terminal cover
(6) pcs 2-pin Locking Connectors
(1) M6 screw for safety lanyard attachment
(1) 2-pin locking connector

loader
Loading...