Pioneer DDJ-SR Performance DJ Controller & QSC K12 Speakers DJ Package
About This Product
Pioneer DDJ-SR Performance DJ Controller
Pioneer’s DDJ-SR 2-channel DJ controller is designed for use with Serato® DJ software. The smaller and more compact DDJ-SR inherits many of the same functions and controls of the larger DDJ-SX introduced in 2012, offering large aluminum jog wheels, integrated performance pads, and a new PAD PLUS feature that adds four additional audio effects to the performance pads..
Mixing with Serato
The DDJ-SR takes advantage of Serato DJ’s full capability, ensuring its layout of knobs and buttons are exceptionally easy-to-use with the software.
Large rubber “performance pads” located below the big jog wheel provide HOT CUE, ROLL, SLICER and SAMPLER functions. Each soft-touch rubber pad illuminates in blue to enable users to tap the pad(s) quickly for each effect, with the output volume varying depending on the strength of each tap.
By activating the new PAD PLUS button, the functions of the performance pads are transformed, converting the four function buttons into HOT CUE ROLL, TRANS, COMBO FX and SAMPLER ROLL. This enables DJs to trigger multiple FX with one button, and automatically sync samples and Hot Cues to the beat. The DDJ-SR also features a Beat Indicator which gives a visual representation of the beat.
Hot Cue Roll/Sampler Roll
Launch Hot Cues and Samples that are automatically synced to the BPM.
Simultaneously trigger and modulate multiple effects and filters with one pad.
Cut the volume of FX in and out at pre-set intervals.
Big Jog Wheels
The DDJ-SR features two large jog wheels for precise scratching and mixing capabilities. The resistance for each jog wheel was fined tuned to provide users with the best “feel” and the shortest latency.
The built-in 2-channel mixer on the DDJ-SR is ideal for scratch performances. The mixer can also be used with four decks using the “deck select” buttons located on each side of the controller. In addition, the unit features a “Cross Fader Reverse” switch to enable the left and right decks to be controlled from opposite sides.
The DDJ-SR sports a steel top panel and an aluminum jog plate for a more elegant and stylish look and feel.
Serato DJ Software
A free-of-charge download of Serato DJ software is included with the purchase of a DDJ-SR for an easy out-of-the-box experience.
DDJ-SR Additional Features:
• The controller can be powered through the USB connection to a laptop.
Built-in Sound Card (audio interface)
• Simple connection to a laptop with a single USB cable.
Adjustable Cross-fader Curve
• Suits any mixing style.
Channel Fader Start
• Enables the use of the channel fader to control and play/cue tracks.
• The controller features grip handles on each side for added convenience.
ProX Pioneer DDJ-SR DJ Controller Case [XS-DDJSRLT]The XS-DDJSR-LT Flight case designed by ProX Cases is made with the highest quality material and workmanship to give you the ultimate security for your SR controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level at all times.
The XS-DDJSR-LT is constructed with a rugged and durable signature 3/8" Series Plywood, reinforced steel ball corners, as well as recessed steel padded handles and latches. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to access front input jacks easily. The front removable panel allows for easy access to the front controls and headphone/mic jacks.
- ATA-300 Style Gig Ready Flight Road Case.
- Easy locking fit and tongue.
- High-density foam interior support & casing.
- Spring action recessed handles.
- Recessed spring action Handles per Side.
- Heavy and powerful steel ball corners.
- Dual anchor rivets.
- Signature Series Laminated 3/8" plywood.
- Digital honey Comb exterior design w/ Chrome Aluminum.
- Industrial Recessed butterfly twist lock latches that can be padlocked.
- Industrial Grade Rubber Feet.
- Cable access hole with removable emblem cover.
QSC K12 1000 Watt 12” 2-way Powered PA Speaker
The QSC K12 is a 12" 2-way PA speaker system boasting a 1,000W Class D power module and ~75° horizontal and vertical coverage. Low frequencies extend to ~48Hz (-10dB high acoustic output, 131 dB peak). This low-frequency extension makes the QSC K12 an ideal choice for music playback and live reinforcement of instruments, especially in venues where more directional speakers are needed. Equally at home in the role of stage monitor, the QSC K12 speaker enclosure has an angled side for use as a low-profile, horizontal wedge and a flat side for proper side-fill use.
QSC's K12 PA Speaker features a 1-3/4" HF device in its 2-way enclosure. The primary differentiator in K Series speakers is the resulting output dispersion—the K8 being the widest at 105° and the K12 the narrowest at 75°. This radical approach is achievable due to a process called Directivity Matched Transition (DMT). DMT allows QSC to take advantage of a fundamental law of acoustics: smaller diameter woofers have wider coverage patterns than larger ones. The K Series matches the HF device to the LF dispersion, allowing for the smoothest and flattest frequency response possible across the entire sound field.
Add to this advanced DSP processing and an enclosure molded from ABS—a material far more rugged and sonically pleasing than conventional plastics—and the QSC K12 delivers exceptional performance in this category of loudspeakers.
Several proprietary QSC DSP technologies are incorporated into the K Series. One such technology is Digital Extension and Excursion Processing (DEEP). DEEP allows each of the K Series models to deliver levels of low-frequency extension previously impossible in enclosures of this size. Intrinsic Correction, first featured in QSC line-array technology, use dozens of spatially averaged measurements mapped to the processor to deliver smooth and accurate reproduction across the entire sound field.
Preventing amplifier clipping or overload is QSC's proprietary GuardRail technology. GuardRail closely monitors the input voltage and controls the amplifier output stage before the onset of clipping. Unlike typical clip limiters, when GuardRail is activated, the results are all but undetectable—there's none of the typical "pumping" associated with other methods. In addition, user EQ controls are provided to select between subwoofer settings (EXTSUB, VOCAL, or FLAT response).
The K12 speaker boasts other user-friendly features. For example, when the speaker is pole-mounted, the Tilt-Direct pole socket converts to a 7.5° down-tilt with a simple 180° rotation of the dial. A locking IEC power cord is included, preventing accidental disconnect during a performance. For installed applications, connecting a commonly available potentiometer to the unit's Euroblock connector allows the operator to have gain control from a remote location. Multiple K Series units can be daisy-chained together to one centralized control. Additionally, the K Series enters Standby mode after 5 minutes of inactivity, conserving power.
The entire QSC K12 package is housed in rugged and sonically friendly ABS (the sub in birch plywood) with steel grilles and easy-carry ergonomic aluminum handles.
Processing, Connectivity & Monitoring
The brain of the system is its expansive digital signal processing. While the DSP functions are optimized using Intrinsic Correction, DEEP, DMT, and GuardRail technologies (with the high-pass filter included for use with subwoofer systems), two XLR-combi inputs, each with its own Level control, are provided. Both accommodate line-level inputs and one may be switched to microphone level sensitivity. Phono (RCA) input jacks are also included for connection of consumer electronics sources. Dual XLR outputs are provided for dual "loop-thru" XLR/M connectors and a single XLR jack is available as a summed output. All 3 input sources may be used at once and mixed via the 2 Gain control knobs.
Input Panel LED indicators are provided for Power, Signal Present, Mic Level Sensitivity, and Limit annunciation. A front-mounted power LED may be disabled by means of a rear-panel switch when desired or set so it indicates when the limit circuitry has been engaged.
Each K model incorporates a conical waveguide that maintains pattern control all the way down to the crossover frequency. The coverage angles of the waveguides are tailored for a smooth transition from woofer to compression driver with far less "waistbanding" or other directivity related anomalies than other products in this class.
Suspension and Mounting
The K12 2-way PA speaker may be pole-mounted, suspended, or yoke-mounted. The K12 yoke accessory kit (not included) allows for either horizontal or vertical yoke mounting, providing a flexible means of attaching K Series loudspeakers to a building structure or truss. When suspended deployment is required, M10 threaded inserts support vertical or horizontal suspension, while the integral polemount socket accommodates 35mm speaker poles for use on a speaker stand or over a sub. The pole socket is designed so that the speaker may be angled down 7.5° in order to cover the audience while keeping acoustic energy off reflective walls and ceilings.
QSC K12 Features:
- 12” Woofer; 1.75” diaphragm compression driver.
- 90° Nominal coverage angle.
- Maximum SPL 131 dB peak.
- 1000 watt continuous Class D power modules in all models.
- Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output.
- Extensive DSP enhances system performance.
- Attractive and professional appearance.
- Rugged ABS enclosures.
- Functions as a monitor wedge.
- 16 Gauge powder coated steel grille.
- Comfortable ergonomic handles.
- 35 mm pole sockets with Tilt-Direct.
- M10 rigging points.
- Eye-bold and Yoke Mount accessories available.
QSC K12TOTE Tote Bag for QSC K12 SpeakersThis soft, padded tote is designed to be used for transporting your K12 speaker safely and easy. It is constructed of a weather-resistant, heavy-duty nylon/Cordura material, and has a side-flap access to the K12’s aluminum top handle for carrying vertically.
- For K12 speaker.
- Nylon/Cordura construction.
- Side-flap access to speaker's top handle for carrying option.
- Side accessory pouch.
Ultimate Support JS-TS50-2 Tripod Speaker Stand Pair with FREE Carry Bag
Speaker stands need to be both sturdy and easy to move. The Speaker Stand (Pair) fits on both accounts, giving you a stable environment in which to elevate your speakers to optimum height. Crafted from aluminum and powder-coated for finish durability, these stands will give you years of service. Each stand can hold up to 120 lbs. The strong telescoping and leg collars provide a stable stand for your speakers. The height adjustment collar has a safety pin for extra security. The JS-TS50-2 also includes a handy carry bag for FREE!
- Part Name: JS-TS50-2.
- Long-lasting aluminum construction.
- Durable powder-coated finish.
- Tripod base is very stable and sturdy.
- Stand is height-adjustable.
- Carrying bag included for FREE!
- Holds up to 120 lbs.
- Height 46.5" - 81.5”.
Shure SV100-W Multi-Purpose MicrophoneExcellent sound quality. Ideal for spoken word, karaoke, multimedia, and instrument use.
The unidirectional cardioid polar pattern of the SV100 helps reduce feedback, while the wide frequency response and high output deliver excellent sound quality. Ideal for spoken-word presentations, karaoke performances, multimedia, and instrument use.
Pioneer DDJ-SR Specifications
|Included Software:||Serato DJ (free download)|
AUX x 1 (RCA)
MIC x 1 (1/4 Inch PHONE)
MASTER OUT x 1 (1/4 Inch PHONE)
MASTER OUT 2 /BOOTH OUT x 1 (RCA)
HEADPHONE MONITOR OUT x 2 (top surface 1/4 Inch PHONE, MiniPin)
|Other Terminals:||USB B Port x 1|
|Frequency Response:||20 Hz ~ 20 KHz|
|Total Harmonic Distortion Ratio||0.006% or less|
|S/N Ratio||101 dB (PC)|
|Maximum Dimensions:||21.8 in (W) x 12.6 in (D) x 2.6 in (H)|
|Serato DJ System Requirements|
|Applicable OS (Mac):||
Mac OS X (10.8.4/10.7.5/10.6.8
32-bit (CPU) 2.0 GHz Core 2 Duo, (Memory) 1 GB
64-bit (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
|Applicable OS (PC):||
32-bit (CPU) 2.0 GHz Core 2 Duo, (Memory) 2 GB
64-bit (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
|Display Resolution:||1280 x 720 or higher resolution|
ProX XS-DDJSR-LT Specifications
25.00"L X 20.00"D X 9.00"H
Weight: 28.00 lbs
26.00"L X 21.00"D X 10.00"H
Weight: 33.00 lbs
QSC k12 Specifications
12" cone transducer
1.75" diaphragm compression driver
|Frequency Response (-6 dB)||52 Hz - 18 kHz|
|Frequency Range (-10 dB)||48 Hz - 20 kHz|
|Nominal Coverage (-6 dB)||75° conical|
|Maximum SPL1||131 dB peak|
|Power Output2||1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
|Input Impedance (ohms)||XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
|Controls||Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)|
|Indicators||Power, Signal A, Signal B, Standby, Limit, Mic|
|Connectors||Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector|
|Cooling||On demand, 50 mm variable speed fan|
|Amplifier Protection||Thermal limiting, output overcurrent, overtemperature muting, GuardRail™|
|Transducer Protection||Thermal limiting, excursion limiting|
|AC Power Input||Universal power supply 100-240 VAC, 50 - 60 Hz|
|AC Power Consumption
|100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
|Material||Impact resistant ABS|
|Grille||Rugged Powder-Coated Steel Grille|
|Dimensions (HWD)||23.7" x 14" x 14"
603 mm x 356 mm x 356 mm
|Weight (Net)||41 lb / 18.6 kg|
|Available Accessories||K12 TOTE, K12 YOKE, M10 Kit-C|
Ultimate Support JS-TS50-2 Specifications
Product Name: JS-TS50-2
Part Number: 17318
Height: 46.5” – 81.5”
Base Diameter: 47”
Load Capacity: 120 lbs.
Telescoping Tube: 1 3/8” (35mm)
Weight (Per Stand): 4.2 lbs.
Shure SV100-W Specifications
|Frequency Response||50 to 15,000 Hz|
|Output Level||-52 dBV/Pa* at 1kHz *1 Pa=94 dB SPL|
|Output Connection||XLR-¼" (6.3 mm)|
This Package Includes:
(1) Pioneer DDJ-SR Performance DJ Controller
(1) ProX Pioneer DDJ-SR DJ Controller Case [XS-DDJSRLT]
(2) Black 10FT 16 Gauge AC Extension Cords
(2) 20FT Sure-Fit XLR connecting cables
(2) QSC K12 1000 Watt 12” 2-way Powered PA Speakers
(2) QSC K12TOTE Tote Bag for QSC K12 Speakers
(1) Ultimate Support JS-TS50-2 Tripod Speaker Stand Pair with FREE Carry Bag
(1) Shure SV100-W Multi-Purpose Microphone
The DDJ-SR Box Includes:
(1) Pioneer DDJ-SR Performance DJ Controller
(1) Software / Driver CD-ROM
(1) USB Cable
(1) Operating Instructions
The XS-DDJSRLT Box Includes:
(1) ProX Pioneer DDJ-SR DJ Controller Case [XS-DDJSRLT]
Each QSC K12 Box Includes:
(1) QSC K12 1000 Watt 12” Powered Loudspeaker
(1) Locking Power Cable
(1) Euro-Style Connector Plug, 3-pin
(1) K Series Hookup Drawings
(1) Warning Information Sheet
Each K12Tote Box Includes:
(1) QSC K12TOTE K12 Speaker Tote Bag
The Ultimate Support JS-TS50-2 Box Includes:
(2) Tripod Speaker Stands
(1) FREE Durable Speaker Stand Carry Bag
The Shure SV100-W Box Includes:
(1) SV100-W with On / Off switch
(1) XLR-¼" cable
(1) 1/4" adapter
(1) User Guide