Class-Leading Power
With up to 2300W of pure, efficient Class-D power, DRM Series Loudspeakers have the headroom to handle the most demanding applications. And to ensure the best performance possible, Power Factor Correction technology keeps the system running perfectly even with unstable AC power.
Advanced Impulse DSP
Utilizing the latest speaker processing technology, Advanced Impulse DSP takes advantage of powerful FIR filters, transducer time-alignment, and precision crossovers to deliver unmatched clarity and responsive low end.
Mackie's filtering technology is not your typical speaker processing. The goal of our Advanced Impulse DSP is to remove all the anomalies that loudspeakers and horns contribute to a signal, from "honkiness" or "squelch" to "mushy" low end, effectively making the drivers "invisible" and output nothing but perfect, clean sound. By more intelligently (and more thoroughly) employing the benefits of FIR filtering, Advanced Impulse DSP eliminates undesired acoustic anomalies across the entire dispersion zone (horizontal and vertical), as well as frequency range and time domain. The main way this is accomplished is by measuring the negative frequency response and time domain impacts that each transducer and horn in the system introduces - on axis as well as off - and reversing/correcting for those anomalies before the signal hits the speaker. The result is the output from the speaker is fully corrected for flat, clear, time-aligned, and smooth sound throughout the entire time, space, and response domains.
DRM Control Dashboard
When you need to get your system up and running, having gear that is fast and easy to configure matters. Every model features our DRM Control Dashboard on the rear panel. Featuring a bright, full-color display, and a single knob control interface, DRM Series loudspeakers are incredibly easy to get sounding perfect for your venue.
Control Overview:- 3-Band Parametric EQ.
- Venue Specific Voicing Modes.
- Array Modes (DRM12A Only).
- Variable Crossover.
- Alignment Delay.
- Configuration.
The SP260 2x6 Speaker Processor - The Heart of Your Mackie Loudspeaker System
Offering sophisticated EQ, crossover, dynamics processing and system protection, the Mackie SP260 2x6 Speaker Processor provides complete system optimization for both passive and powered systems. Five different operating modes cover a wide range of systems. Each input and output is loaded with a huge range of processing including flexible EQ, crossover, delay and limiting solutions, as well as the all-new DRM powered voicing curves (available for download in January 2019, and in all future production models). It delivers everything you need to professionally optimize loudspeaker systems of nearly any size. The SP260 utilizes high-end 24-bit AKM AD/DA converters with 120dB dynamic range for class-leading sound quality. With 24 user-definable presets and flexible I/O for simple routing and configuration, the SP260 is an ultra-flexible processor, ideal for a wide range of portable and permanent applications.
Custom high-sensitivity woofers and titanium diaphragm compression drivers housed in braced plywood cabinets are designed for consistent performance in the most demanding applications. On the exterior, each DRM is covered in a touring-grade textured coating and paint that is made to last. The unique ported design of DRM cabinets allows for punchy, responsive bass while simultaneously helping to keep the amplifier cool.
DRM Series Loudspeakers offer all the configuration options you would expect for professional applications. Equipped with M10 flypoints, dual angle pole mounts, and available line array configurations for maximum versatility. Both the DRM212 and DRM215 feature angled cabinet designs to allow for use as high-powered floor monitors.
Not only is the DRM Series an amazing choice for DJs, bands, clubs, and rental systems, the series also offers solutions for production and install applications. Fly up to 4 DRM12A cabinets plus 2 DRM18S subwoofers for an incredibly powerful, great sounding system that is perfect for venues, houses of worship, and more. Combine with the SP260 Loudspeaker Processor for the ultimate Mackie passive system.
Mackie DRM212 Loudspeaker Specifications:
| Acoustic Performance |
| Frequency Range (-10 dB): | 45 Hz - 20kHz |
| Frequency Range (-3 dB): | 50 Hz - 20 kHz |
| Horizontal Coverage Angle: | 90 degrees |
| Vertical Coverage Angle: | 60 degrees |
| Maximum SPL Peak: | 134 dB |
| Monitor Angle: | 50 degrees |
| Transducers |
| Low Frequency: | 12" / 305 mm with ferrite |
| Mid Frequency: | - |
| High Frequency: | 1.4" / 36 mm titanium dome compression driver |
| Power Amplifiers |
| System Power Amplification Rated Power: | 1600 watts peak |
| Low Frequency Power Amplifier Rated Power: | 1220 watts peak |
| Low Frequency Power Amplifier Rated THD: | Less than 1% |
| Low Frequency Power Amplifier Cooling: | Convection |
| Low Frequency Power Amplifier Design: | Class D |
| High Frequency Power Amplifier Rated Power: | 380 watts peak |
| High Frequency Power Amplifier Rated THD: | Less than 1% |
| High Frequency Power Amplifier Cooling: | Convection |
| High Frequency Power Amplifier Design: | Class D |
| System Processing |
| Voicing: | 4 Speaker Modes |
| Subwoofer HPF: | Off, DRM18S, Var |
| Main Output EQ: | 3-band |
| Delay: | 0 - 100 ms |
| Equalization |
| Low: | ± 12 dB @ 20 HZ - 200 Hz |
| Mid: | ± 12 dB @ 200 HZ - 2.00 kHz |
| High: | ± 12 dB @ 2.00 kHZ - 20.0 kHz |
| HPF: | 40 HZ - 160 Hz (Var) |
| Input / Output |
| Input Type: | 2x Female XLR Balanced
1/4" Balanced
1/8" Stereo |
| Mic-Line Impedance: | 8 kΩ balanced |
| 1/4" TS, Wide-Z Impedance: | 1 MΩ unbalanced |
| Direct Out and Mix Out: | Male XLR Balanced |
| Mix Out Impedance: | 600 Ω balanced |
| Main Control: | Rotating Knob |
| Electronic Crossover |
| Crossover Type: | 24 dB/octave |
| Crossover Frequency: | 1.5 kHz |
| Line Input Power |
| Detachable line cord: | ~100 - 240 VAC, 50 - 60 Hz, 110W
~220 - 240 VAC, 50 - 60 Hz, 110W |
| AC Connector: | 3-pin IEC 250 VAC, 10 A male |
| Power Supply Type: | Switchmode |
| Safety Features |
| Input Protection: | Peak and RMS limiting, power supply and amplifier thermal protection |
| Display LEDs: | Defeatable front power, Speaker Control |
| Status Info: | Input and output levels, voicing mode, sub HPF, EQ and delay settings |
| Construction Features |
| Basic Design: | Asymmetrical |
| Enclosure Material: | Plywood |
| Enclosure Finish: | Black Polyurea |
| Grille Material: | 16 - 18 gauge perforated steel |
| Grille Finish: | Powder-coated black |
| Handles: | One on each side, one on top |
| Display LEDs Front: | Power ON |
| Display LEDs Rear: | Speaker Control |
| Operating Temperature: | 0-40 degreesC
32-104 degreesF |
| Shipping: | Packed and shipped with TLC from idjnow HQ, Ronkonkoma, NY. |
| Height: | 25.0" / 635 mm |
| Width: | 14.7" / 373 mm |
| Depth: | 16.2" / 411 mm |
| Weight: | 42.0 lb / 19.1 kg |
Login
Register
Forgot Your Password