JBL Pro Control 25-1-WH Compact Indoor/Outdoor Background/Foreground Speaker in White (only sold in pairs)
About This Product
JBL Pro Control 25-1 Compact Indoor/Outdoor Background/Foreground Speaker
The Control 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
Control 25-1 Features:
- Contemporary, high-design appearance.
- Built-in InvisiBall mounting hardware, plus available U-bracket.
- Weather resistant enclosure and transducers.
- Wide 100° x 100° coverage.
- 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
- High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.
- 5-¼” woofer with woven fiberglass cone
- 3/4” PEI diaphragm tweeter with fluid cooling
|Frequency Range (-10 dB)||60 Hz to 20 kHz|
|Frequency Response (+/-3 dB)||85Hz - 17 kHz|
|Power Rating||200 W Continuous Program (2 hrs)
100 W (400W peak), Continuous Pink Noise (2 hrs)
75 W (300W peak) Continuous Pink Noise (100 hrs)
|Maximum Input Voltage||25.3 V RMS (2 hrs), 50.6 V peak|
|Maximum SPL||110 dB ave. Continuous Pink Noise (116 dB peak)|
|Sensitivity||90 dB, 1W/1m (ave. 100 Hz – 10 kHz)|
|Coverage Angle||100° x 100°|
|Directivity Factor (Q)||6.04 (averaged 1kHz – 16kHz)|
|Directivity Index (DI)||7.6dB (averaged 1kHz – 16kHz)|
|Nominal Impedance||8 ohms (THRU setting)|
|Crossover Type||2nd order low-pass, 3rd order high-pass|
|Transformer Taps||70V: 30W, 15W, 7.5W, 3.7W
100V: 30W, 15W, 7.5W
Insertion Loss <0.94 dB at any tap setting
Thru Setting: 8Ω nominal
|60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).|
|Low Frequency Driver||135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.|
|High Frequency Driver||19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.|
|Enclosure Material||High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.|
|Grille||Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing.|
|Installation||InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.|
|Environmental||IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments.|
|Termination||Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.|
|Agency Rating||ROHS-compliant; Transformer UL Recognized per UL1876|
|Colors||Black (RAL9004) or white (-WH, RAL9016)|
|Dimensions (H x W x D)||243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.|
|Net Weight||3.4 kg (7.5 lbs)|
|Shipping Weight||8.16 kg (18 lbs) for the pair-pack (for 2 speakers)|
|Included Accessories||InvisiBall wall-mounting system), 6 mm x 100 mm hex key|
|Optional Accessories||MTC-25UB-1 – Yolk-type U-bracket (&-WH)
MTC-25WMG-1 – WeatherMax grille with backing (&-WH)
MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)
(2) JBL Pro Control 25-1 Compact Indoor/Outdoor Background/Foreground Speakers
(2) InvisiBall wall-mounting systems
(2) 6 mm x 100 mm hex keys