Electro-Voice ZX1i 8” Two-Way Full-Range Indoor/Outdoor Loudspeaker In White - Installation Series
About This Product
Electro-Voice ZX1i 8” Two-Way Full-Range Indoor/Outdoor Loudspeaker In White
The Electro-Voice ZX1i is the new standard of no compromise audio performance and versatility in an easy to install, compact sound reinforcement package.
The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise. ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations. All Zx1i "t" versions use a special circuit that, when in transformer mode, re-configures the network to a current actuated Hi-Pass filter at the transformer primary. It gently rolls off the lowest frequencies to maintain a safe load on the amplifier without affecting the higher (vocal) frequencies and the program continues without interruption. Low frequency current is limited through the transformer eliminating low frequency saturation. Automatic Saturation Compensation allows many speakers to be run on a distributed line with a 50Hz Hi-Pass filter before the amplifier, regardless of the number of speakers on the same line (the number of tapped watts cannot exceed the amplifier rating). With the same 50Hz Hi-Pass, 10 speakers on transformers will have the same full sound as a single speaker at 8 ohms.
Electro-Voice ZX1i Features:
- Velocity-compensated port for exceptional LF.
- Long-excursion weather-treated EV8L woofer.
- 1.25-inch DH2005 titanium HF compression driver.
- Choice of 90º x 50º or 100º x 100º rotatable horn.
- Passive crossover with full-band overload protection.
- Also available in 70/100 volt transformer version with Electro-Voice PATENTED ASC Automatic Saturation Compensation.
- High sensitivity, 123 dB maximum SPL.
- Power handling: 200 W continuous, 800 W peak.
- Compact high-impact polypropylene enclosure.
- Integrated QuickSAM™ heavy-duty Strong-Arm Mounting bracket.
- Paintable black or white finish.
Electro-Voice ZX1i Specifications
|Input Connections||4-pin Phoenix|
|Nominal Impedance||8 Ω|
|Speaker Type||Full-range, Mid-High, Two-Way|
|Frequency Response (-3 dB)||60 - 20000 Hz|
|Frequency Response (-10 dB)||48 - 20000 Hz|
|Recommended High-Pass Frequency||40 Hz|
|Sensitivity 1 W/1 m||94 dB|
|Max. SPL/1m (calc)||123 dB|
|Coverage (Nominal -6 dB) H||90/100 ° Rotatable|
|Coverage (Nominal -6 dB) V||50/100 ° Rotatable|
|System Power Handling (Continuous/Program/Peak)||200//800 Watts|
|LF Transducer||8-inch EV8L|
|HF Transducer||1.25-inch DH2005|
|Crossover Frequency||1700 Hz|
|Minimum Impedance||6 Ω|
|Enclosure Material||High Impact Polystyrene|
|Grill||Polyester Powder Coated, 18GA Galvanized Steel|
|Height||451 mm (17.76")|
|Width||282 mm (11.1")|
|Depth||263 mm (10.35")|
|Weight Net||8.4 kg (18.52 lbs)|