Denon Pro Delta 12 12” Powered Speaker with Wireless Connectivity
About This Product
Denon Pro Delta 12 12” 2-Way 2400-watt Loudspeaker with Wireless Connectivity
When you need the ultimate in speaker performance, Denon Professional proudly offers the Delta Series—a family of powered loudspeakers that delivers the very highest level of acoustic performance, essential for critical musical productions, dynamic AV playback and clear, articulate spoken presentations. The Delta Series was designed from a clean sheet of paper to exacting performance standards, using custom-developed, purpose-matched components.
Dynamic Acoustic Performance
The Delta 12 features an integral low-distortion Class D amplifier capable of 2400 watts peak output (1200 watts continuous). The ultra-durable, linear transducers are paired with custom DSP-controlled crossovers and computer-designed high-frequency waveguide for an optimized 90° x 60° coverage field. Highly flexible connection/control facilities easily adapt the speaker to any usage condition. Plus, the entire Delta series utilizes dynamic thermal protection to ensure reliable, studio-grade sound reproduction at any volume level.
However, it’s not the printed specifications or the number of inputs and outputs that qualifies the Delta 12 as such an elite performer. It’s the performance. The sound is effortless, clear and natural. There is no sense of strain or coloration. With lesser speakers, the listener can immediately hear the “reproduced” nature of the sound; that unmistakable nasal artificiality and edgy, strident distortion that betrays the sound of an inaccurate speaker system.
When you hear the Delta 12, it sounds like real life. The full frequency range is conveyed with absolute authority, providing convincing, realistic sound from any genre of music. Bass instruments are full and muscular. Vocals are distinct and precise, while horns are rich and energetic, their characteristic “sheen” perfectly preserved. Drums and percussion have great impact and impressive weight. Even today’s complex, multi-layer music is reproduced with agility and nuance at any volume, from subtle indoor settings to full-volume outdoor concerts. When you need even greater low-frequency extension and output, simply add either the Delta Series 15 Sub or 18 Sub to create a system of absolutely uncompromised capability.
The Right Connections
Denon Professional recognizes that adaptability and connection flexibility are just as important to a successful event as outstanding sonic performance. Therefore, the Delta series features a built-in mixer with multiple inputs and outputs. The cabinets are scratch-resistant, fronted with a powder-coated metal grille—perfect for anything from vocal reinforcement in a lecture hall to music-rich multimedia presentations in convention. Even their rubber feet are reinforced with steel. You can hang the Delta series via their integrated M10 rigging points or use the “tops” as floor wedge monitors. They may also be mounted via industry-standard built-in 35mm pole sockets. This level of connection and mounting options means that virtually every situation benefits from using Delta Series loudspeakers.
Even if you can’t physically reach the speakers, you can still adjust them with your iPad or iPhone uing the Drive iOS app. With our wireless technology, you can precisely tailor the performance parameters of your Delta Series loudspeakers remotely. Level-match, adjust EQ, delay-compensation and more—from virtually anywhere. It’s streamlined, sound-shaping control at your fingertips, so you can easily adapt the Delta Series to new venues or performances, even if you’re away from the mix position.
Delta 12 Features:
- Unrivaled acoustic accuracy via advanced engineering and design.
- 2400 watts peak Class D power (1200 Watts continuous).
- 12” LF transducer, 1.75” HF driver with 1” acoustic aperture.
- Optimized 90° x 60° sound coverage field.
- Works with free Denon Drive app for wireless sound-shaping control.
- Wirelessly level-match, EQ, delay-compensation, and more.
- DSP-controlled, custom crossover and active thermal protection.
- Built-in mixer, (2) Mic/Line inputs, volume control, XLR output.
- Limit/Clip indicator with red LED.
- EQ contour switch; Ground Lift switch.
- Trapezoidal cabinet with custom-molded heavy-duty handle.
- Flyable via (12) M10 rigging points.
- Designed and tuned in the U.S.A..
Denon Pro Delta 12 Specifications
System Type: 12-inch two-way, self-powered, horn-loaded HF
Frequency Range (-10 dB): 43–20kHz
Frequency Response (+/-3 dB): 51–20kHz
Maximum Peak SPL (Measured): 133 dB @ 1m
Coverage Pattern (Averaged): 90° H x 60° V
Directivity Index (D.I.): 9.5 dB
Peak Power: 2400 watts (1600 watts LF + 800 watts HF)
Continuous Power: 1200 watts (800 watts LF + 400 watts HF)
Amplifier Topology: Class D/Switching, Bridged LF and HF
Amplifier Cooling: Passive
LF Transducer: 12-inch (305mm) cone transducer, 3-inch (76mm) voice coil, ferrite magnet
HF Transducer: 1.75-inch (44mm) voice coil, ferrite magnet compression driver with 1-inch (25mm) exit
System Control: high-pass & low-pass crossover filters, transducer EQ and delay compensation Transducer excursion, thermal, and amplifier clip protection
User Controls: Rear panel selection of 5 DSP EQ modes: Flat, Contour, 80 Hz HP, EXT LF, User
WIRELESS CONTROL AND MONITORING
Wireless Type: Bluetooth 2.0 + EDR. Class 2 RF
Wireless Range (typical): 82 ft. (25m) clear line-of-sight
Wireless Control App: Live Drive™ (app by Alto Professional, available on the App Store)
Simultaneous Devices Connectable: 1 to 3 Delta Series loudspeakers
Compatible Wireless Devices: iPhone 3GS and newer, iPad 2 and newer, iPod touch (4th generation) and newer
iOS Version Requirements: iOS 6.1 and newer
Wireless Control Features: Level Control (-∞ to + 10dB), Mute, Signal level metering -70 to 0dB) DSP mode (Flat, Contour, 80 Hz HP, Ext. LF, User) Rear Panel control lockout, 3 Band EQ (Low, Mid, High), Delay, Polarity, User high-pass filter, Monitoring (Limit, Peak, Fault)
AC LINE POWER
Power Supply Design: Fully regulated switching, with Power Factor Correction
Input Voltage Nominal Range: 100–240 VAC, 50/60Hz
Input Voltage Operating Range: 90–264 VAC, 50/60Hz
Voltage Selection: Automatic (self-regulating)
Power Connector: Male IEC
Current Requirement: 6A per system @ 120 VAC 3A per system @ 240 VAC
AC Line Cord: 9.8 ft. (3m) IEC female to regional AC male, 18 AWG
CONNECTORS AND CONTROLS
Input Connectors: 2 x XLR/TRS combo connectors, balanced
Input Impedance: 10 KΩ balanced, 20 KΩ unbalanced
Input level Controls: 2 x rotary volume control
Acoustic Polarity: Positive voltage applied to XLR Pin 2 generates positive pressure from LF driver
Line/Mic Level Selector: Push-button switch (applies to Input 1 only)
Output Connector: Male XLR
Output Mix Control: Switch to select output mix pre- or post-volume control
Ground Switch: Push button to lift input signal input ground connection
Bluetooth: Momentary contact to initiate Bluetooth pairing mode
DSP Mode Selection: Momentary contact to cycle through DSP EQ modes
DSP Modes Available: 5 total: Flat, Contour, 80Hz HP, EXT LF, User
DSP Wireless Control: Live Drive™ iOS app over Bluetooth
Grille Logo LED On/Off Control: Recessed push-button switch
Standby mode On/Off Control: Recessed push-button switch
LED Indicators: Signal Present / Limit, Power / Standby
Line Input Level Control Range: -∞ to 0dB, +4dBu nominal, +10dBu for max output
Mic Level Control Range: -∞ to +50dB
Construction: 15mm and 18mm premium plywood, internally-braced
Finish: High-durability, textured, catalyzed polyurethane, black
Mounting: 12 x M10 female threaded screw sockets
Handles: 3 x ergonomic handles with aluminum cross-bar
Stand mount: 1 x 35mm female socket
Grille: 1.2mm-thick perforated steel, black powder-coat
Operating Temperature: -10°C to 40°C (14°F to 104°F)
Dimensions (HWD) 24.1" x 14.3" x 14.6" 611mm x 364mm x 372mm
Net Weight: 52.2 lbs (23.7 kg)
The Delta 12 Box Includes:
(1) Denon Pro Delta 12 12” 2-Way 2400-watt Loudspeaker with Wireless Connectivity
(1) Power Cord
(1) User Guide
(1) Safety & Warranty Manual