Blizzard Lighting LightCaster AnyFi Multi-Signal Wireless DMX Transceiver
About This Product
LightCaster AnyFi is a USB rechargeable, battery powered wireless DMX transceiver that is capable of transmitting or receiving either ultra-stable, Wireless Solutions AB W-DMX 2.4 Ghz ISM; Adaptive Frequency Hopping Spread Spectrum (AFHSS) wireless DMX signals, or Blizzard Lighting's own Skywire 7-channel wireless 2.4 GHz band frequencies. With its color coded LED status indicator, the LightCaster AnyFi will also match up perfectly to any Blizzard wiCICLE and/or Skywire enabled product. An additional 6-channel color coded 2.4GHz wireless GZ mode (not directly compatible with Skywire) is also installed that will sync up with other 6-channel enabled AnyFi products.
Its user-friendly operation simplifies all the complex communication protocols, and it features an easy-to-use 4-button TFT display menu interface, making setup a breeze. And no matter which protocol is used, you can expect to achieve reliable wireless communication for over 1000 feet (line-of-sight).
When using W-DMX, you can leave any worries behind concerning loss of signal due to its built-in FHSS technology (Frequency Hopping Spread Spectrum). FHSS are frequency hopping techniques, in which the transmitter jumps from sub-channel to another at a very rapid pace. An unlimited number of receivers can be controlled by each transceiver, each one able to control 512 channels of DMX (1 universe).
With our Skywire 2.4GHz protocol wireless DMX, you can pair your other AnyFi, wiCICLE, or Skywire transmitting and receiving units together simply by matching up one of the 7 different color coded frequency groups that illuminate on each of the LED status indicators. With each frequency group, there are 512 auto-assigning frequencies that allow each system to run simultaneously in the same space, completely free of interference.
Come out of the cold! Get the system with the best and most wireless DMX options available today with the LightCaster AnyFi
LightCaster AnyFi Features:
- Built-in Wireless Solution Compatibility Mode.
- Built-in Skywire 7-Channel Compatibility Mode + 6-channel Mode.
- Built-in lithium battery.
- TFT display and friendly menu interface.
- Adaptive Frequency Hopping Spread Spectrum (AFHSS).
- 32-bit ARM Processor, DMA transfer without delay.
- Standard 3-pin XLR In/Out connections.
- 4-button status menu and LED frequency/status indicator.
- Plug-and-play operation, pairing mode, supports more transmitter universes.
Blizzard Lighting LightCaster AnyFi Specifications
Power Input: DC 5V, ±5%
Power Consumption: 350 mA@5V DC max.
DMX Signal Interface
3-pin XLR Input
3-pin XLR Output
Range: 1,000 FT (line-of-sight)
Frequency: 2.402-2.480GHz, ISM, 79 channels
Spread Spectrum: FHSS, 1100 hops / sec
Maximum Transmit Power: 23dBm
Receiver Sensitivity: -94dBm
Weight & Dimensions
4 x 3.5 x 1.6 inches (103 x 88 x 40 mm)
Weight: 8.8 oz (250 g)
2-year limited warranty
(1) Blizzard Lighting LightCaster AnyFi Multi-Signal Wireless DMX Transceiver