Features
Inputs
Number of Inputs:
4
Connectors:
Female XLR
Type:
Electronically balanced/RF filtered
Impedance:
>50k ohm
Maximum Input Level:
Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu
CMRR:
>40 dB typical, >55 dB at 1 kHz
Digital Inputs
Inputs:
(4) AES/EBU Channels
Connectors:
Female XLR
Type:
Transformer Isolated, RF filtered
Impedance:
>110 ohms
RTA Inputs
Input:
(1) Analog
Connectors:
Female XLR
Gain Range :
10dB to 50dB in 10dB increments
Analog Outputs
Inputs:
8
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance:
30 ohms
Max Output Levels:
Software selectable for: +24, +22, +20, +12, +8, +4 dBu
Digital Outputs
Outputs:
(8) AES/EBU Channels
Connectors:
Male XLR
Type:
Transformer Isolated, RF filtered
Impedance:
>110 ohms
A/D Performance
Type:
dbx Typve IV™ Converstion System
Dynamic Range :
>114 dB unweighted, 116dB A-weighted
Type IV™ dynamic
range:
128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW
Samle Rate:
96kHz
A/D Wordlength:
24 bits
D/A Performance
Dynamic Range:
112 dB unweighted, 115 dB A-weighted
Sample Rate:
96kHz
D/A Wordlength:
24 bit
System Performance
Dynamic Range:
112dB unweighted, 115dB A-weighted
Internal Processing:
32 bit floating point
THD + Noise:
0.004% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response:
20 Hz- 40 kHz, +/-0.5 dB
Interchannel Crosstalk:
<-85 dB at 1 kHz, 0 dB input gain
Processing
Pre EQ Type:
One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input
Range:
+/- 12dB
Input Insert Procssing:
Two selectable Insert Processing blocks per input
Type:
Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression
Input Delay Length:
Up to 682 mSec available
Routing/Mixing:
4-input mixer available at each output allowing any input to be sent or mixed to any output
Output Insert Procssing:
Two selectable Insert Processing blocks per output
Type:
Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression
X-Over Filter Configs:
1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8
Type:
Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave
Polarity:
Positive and Negative
Phase Control:
0 to -180 degrees in 5 degree in
